Raisecom RC803 Manual do Utilizador descarregar pdf (Página 17)

Beijing Raisecom Science & Technology Co., Ltd

The descriptions for each button located at middle are as follows:

Item Description

> Move selected item(s) from left list to right list.

< Move selected item(s) from right list to left list.

>> Move all item(s) from left list to right list.

<< Move all item(s) from right list to left list.

Step 3. Configure Loop or Normal settings for the E1 line.

Step 4. Click [Close] button to exit this dialog box when you complete configuration.

3.2.1.4 Refreshing

Select [Refresh] from the right click menu to perform refresh operation, the current device view will

change to display in latest state accordingly. When Trap messages from the device cannot be received

appropriately, this operation is useful for user to monitor real-time status of that device timely.

3.2.1.5 Opening Remote Device View

Select [Remote Device] from the right click menu on device view to open the remote device view.

You will see a message prompting “Remote Device Offline!” when selected remote device is not

connected.

Figure 3-14 The Hint message

3.2.1.6 Saving Configuration

This function is only available in standalone PDH of REV.M version.

Select [Save Config] from the right click menu to apply configuration for this device. When restarted

after power off, the device will resume to its previously saved configuration automatically. For example,

when enable the “Alarm Sound Output” feature and perform “Save Config” operation, after you turn off the

device and restart it, the “Alarm Sound Output” item will be still in enable state.

3.2.1.7 Clearing Configuration

This function is only available in standalone PDH of REV.M version.

Select [Clear Config] from the right click menu to perform clearance operation. The device will not

perform reconfiguration after restarting once time, and will resume to settings preconfigured at factory.

3.2.1.8 Refreshing Chassis Temperature

Double click the temperature icon presented on rear panel view. The temperature value of current

device will update simultaneously, as the figure shows below:

RC003COMM(RC004-16) EMS User Manual 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 50 51

Sem comentários

Raisecom RC803 Manual do Utilizador Página 17